Quick Summary
Yes, you have to signal on your driving test, and examiners watch your indicators, mirrors and signals from the moment you start the engine until you switch it off. Good driving test signal use shows the examiner you plan ahead and think about other road users. Signal when turning, changing lanes, pulling away and leaving a roundabout.
- Signal early, about three seconds before you move, not at the last second.
- Follow the order: mirror, signal, blind spot check where needed, then move.
- At a roundabout, signal left when leaving and signal right only when going further round.
- Cancel your indicator after the manoeuvre, as a light left flashing confuses other drivers.
- Late, missing or wrong signals are common reasons for a driving fault.
Table of Contents
- Why Signalling Matters on Your UK Driving Test
- When to Signal Driving: Turning, Changing Lanes and Pulling Away
- How to Signal at a Roundabout Without Confusing Other Road Users
- Driving Test Hand Signals and Signals from Other Road Users
- When Not to Signal and Common Mistakes Examiners Notice
- Practise Your Signalling Before Booking Your Next Test
- Frequently Asked Questions
Why Signalling Matters on Your UK Driving Test
Last Updated: 17 November 2026
Yes, you have to signal on your driving test. Using your indicators consistently helps demonstrate the planning and awareness expected throughout the test, alongside the wider skills covered by a complete driving test guide.
Driver Training Theory offers free theory questions and mock tests covering Highway Code rules, including signalling. Many learners focus on the driving itself and forget that signals count too.
Signalling is part of the Highway Code (The Highway Code – General rules, techniques and advice for all drivers and riders (103…). Drivers are expected to signal their intentions clearly and at the right time.
Why examiners care about signals:
- They show other road users what you plan to do
- They prove you check your mirrors before moving
- They help keep you safe at junctions and roundabouts
- They show the examiner you are thinking ahead
Quick answer: Yes, you should signal when turning, changing lanes, pulling away and leaving a roundabout. Signal early enough for others to see it, and cancel the indicator once the manoeuvre is complete.
When to Signal Driving: Turning, Changing Lanes and Pulling Away
Most of your signals will fall into three situations. Get these right and you will cover most of what the examiner looks for on your driving test signal checks.
Signal when you:
- Turn left or right at a junction
- Change lanes on a multi-lane road
- Pull away from the kerb
- Move out to pass a parked vehicle
- Leave a roundabout
Signal early, not at the last second. A useful habit is to indicate about three seconds before you move.
Check your mirrors first, then signal, then check your blind spot, then move. Examiners often mark drivers down for signalling after they have already started to turn.
Here is a simple order to follow:
- Mirror
- Signal
- Blind spot check (where needed)
- Move
Cancel your indicator after the manoeuvre. A light left flashing can confuse other drivers, and examiners notice it.
The table below sets out the main situations in which you should signal, with the timing and the point to remember for each.
| Situation | When to signal | Key point |
|---|---|---|
| Turning left or right at a junction | Early, before you move | Check mirrors first |
| Changing lanes on a multi-lane road | Before you move across | Check your blind spot |
| Pulling away from the kerb | Before you move off | Signal early, not at the last second |
| Moving out to pass a parked vehicle | Before you move out | Cancel once complete |
| Leaving a roundabout | As you leave | Cancel after the exit |
| Usual timing before moving | About three seconds before | Signal before you move |
How to Signal at a Roundabout Without Confusing Other Road Users
Roundabouts catch out a lot of learners. The rule is simple, but people often get it wrong in practice.

Signal left when you leave the roundabout, and signal right when you are turning right or going round past the next exit.
A typical approach looks like this:
- Approach in the correct lane for your exit
- Signal left as you pass the exit before the one you want
- Keep your indicator on until you are past the exit you need, then turn it off
Signalling right on the way in is correct only when you are going further round. Many learners signal left all the way round, which can mislead other drivers.
Here are common roundabout errors:
- Signalling right when turning left
- Forgetting to cancel the indicator after exiting
- Failing to signal at all when leaving
Watch out: a late or missing exit signal is one of the most common reasons for a driving fault at roundabouts.
Driving Test Hand Signals and Signals from Other Road Users
Hand signals are rarely needed on the test, but you should know what they mean.
The Highway Code covers these signals in detail. You can read the official guidance on Highway Code signals to other road users.
Common driver hand signals you should recognise:
- Right arm extended, pointing right: the driver intends to turn right
- Right arm extended, moving up and down: the driver intends to slow down or stop
- Right arm extended, rotated in a circular motion: the driver intends to turn left
- Brake lights: the driver is slowing or stopping
- Reversing lights: the driver is reversing
Signals from authorised persons:
Police officers and traffic officers may direct traffic by hand or by arm.
What to do when you see an authorised person’s signal:
- Identify who is signalling and where they are standing
- Read the arm position and direction of the gesture
- Check your mirrors and blind spots
- Respond smoothly and predictably
Watch out: do not assume an officer’s signal gives you priority over pedestrians or other traffic.
Pay attention to what other drivers do, not just what their indicators show. A cyclist may signal with an arm, and a pedestrian may gesture to you.
If you use a hand signal yourself, make it clear and hold it long enough for others to see it.
When Not to Signal and Common Mistakes Examiners Notice
Not every move needs a signal. Knowing when to leave your indicator off is just as important.
You usually do not need to signal when:
- Driving straight ahead on a road with no junctions
- Moving within your lane without changing direction
- Keeping your position on a dual carriageway without changing lanes
Some road users need extra care. The Highway Code covers extra care for these road users in detail, and you can read it on Highway Code rules for road users requiring extra care.
A step-by-step method for signal questions:
Most theory questions about signals follow the same pattern. Use this order every time:
- Identify the signal: is it a road sign, an indicator, a hand signal or a signal from an authorised person?
- Interpret its meaning: what is it telling you to do or not do?
- Choose the safe response: slow down, stop, proceed or change position
- Check for conflicts: does another signal or road marking change the answer?
This method helps because it separates recognition from response. Many learners recognise a sign but choose the wrong action under test pressure.
Common mistakes examiners notice:
- Signalling and moving at the same time
- Leaving the indicator on after the manoeuvre
- Signalling too late for a junction or lane change
- Not signalling when you should
- Signalling when there is no need, which can confuse others
Confusing lookalike signs and signals:
Some signs and signals are easy to mix up.
Watch out: a signal that does not match your action, such as signalling right and then turning left, can cause a serious accident and will be marked down.
Road markings also affect where you can move. Learn what yellow box junctions and chevrons mean before your test, because they change where you can position your vehicle.
Practise Your Signalling Before Booking Your Next Test
Knowing the rules is one thing. Using them smoothly under test conditions is another. The best way to build the habit is regular practice.
Try this simple routine on every drive:
- Say your mirror, signal, blind spot and move steps out loud
- Cancel your indicator after every turn and lane change
- Practise roundabouts until the exit signal feels automatic
- Ask your instructor to mark your signalling in each lesson
Our advice is to practise each manoeuvre until it feels routine. Many learners find that once signalling becomes a habit, they worry less on test day.
You can also test what you know with theory revision. Driver Training Theory offers free theory questions and mock tests, which can help you check your understanding of signals and road rules before you book your test.
Ready to build your road sign and signalling knowledge? Start with free practice questions from Driver Training Theory and test yourself before your next lesson.
Frequently Asked Questions
When should you signal on a driving test?
You should signal whenever your action will affect other road users: before changing lane, turning at a junction, pulling away from the kerb, pulling in or out of a parking space, and leaving a roundabout. Signals should be given in good time so that other drivers, cyclists and pedestrians can anticipate your movement. Examiners look for signals that are timely, clear and consistent with your position and intention. Signalling late, or not at all, is one of the faults that can be recorded during the practical test, so build the habit during every lesson.
Do you have to signal when leaving a roundabout?
Yes. When you leave a roundabout, you should signal left or right before you reach your exit so that drivers behind you and those approaching from the next arm know your intention. Signal your intention to leave, not to remain on the roundabout. Keep your signal on until you have completed the manoeuvre, and cancel it once you are clear of the junction. The Highway Code expects you to use signals to indicate your intended direction at every stage of a roundabout.
When should you not signal while driving?
You should not signal when there is no manoeuvre planned, because a signal that does not match your movement misleads other road users. Avoid leaving an indicator on after a turn has finished, and do not signal to hold your position in a lane. Cancel the signal as soon as the manoeuvre is complete. Examiners may note a signal that is left on, or one that is given when you then do something different, as an error.
Can you fail a driving test for not signalling?
Yes. Failing to signal when it is needed is a recordable driving fault, and enough of them can lead to a fail. Signalling is treated as part of observation and communication with other road users, so omissions are assessed alongside mirror checks and junction behaviour. Practise signalling until it becomes automatic, and check that you cancel your indicators after each manoeuvre.

